2019 Winter Custom Yachts Custom Carolina12m

Power:

• Triple Mercury Verado 400 HP Outboards, custom painted white
• Mercury Platinum warranty coverage in place through 10/07/2024
• Mercury gauges and controls
• Mercury power steering
• Mercury fuel filters

Mechanicals:

• Side Power 12-volt DC Bow Thruster
• SeaKeeper SK3 gyro stabilizer (Warranty remaining through 07/18/2023)
• Jabsco salt water pump
• Jabsco Blaster fresh water pump
• (4) 1500 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
• (2) 2000 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
• RULE sump boxes
• FRP discharges on hull sides
• Dometic freshwater flush head with 15 gallon holding tank
• 642 gallon fuel capacity 
• 50 gallon fresh water tank
• 15 gallon hot water heater
• (2) Newmar 60-amp battery charger 12-volt, (3) bank
• C-Zone control system on all DC systems
• Custom Paneltronics panels
• 120-volt AC, 24-volt DC
• 30-amp, 240-volt AC service
• 12-volt DC lighting throughout
• All wiring guided by ABYC standards
• (2) Lumishore underwater lights in transom (NEW June 2022)
• Livorsi 1150 high speed trim tabs

Top Deck:

• Forward bow seating with ample storage within
• (6) 15 degree rod holders in bow cap
• (4) 8” pull up cleats on top deck
• Faux teak toe rail with chafe gear
• Custom removable bow pulpit and gear
• RC-5 low profile windlass
• MaxSet 8 polished SS plow anchor
• Genuine teak decking
• Radiused gunnel faces
• Ample storage under love seat
• Chipped ice from Eskimo Ice Chipper plumbed underneath forward seat
• (2) Fuel fills on side gunnels
• Water fill on side gunnels
• Waste access on gunnels
• Full pass through side door with gate

Hardtop:

• Custom Palm Beach Towers Hardtop
• Custom molded hardtop with polished aluminum frame T-top style
• Underside of hardtop painted in gray/matte finish
• Upgraded hardtop to incorporate thicker 3” hardtop
• Radar Pod
• Molded aft single 12-volt LED LUMITEC spreader light with molded pod
• Molded forward single 12-volt LED LUMITEC spreader light with molded pod
• Molded Navigation Lights
• Recessed dome lights 12-volt, tri-color
• (6) Rod holders welded to aft side of hardtop
• Anchor light on mast
• Molded in “Pancake” Birdsall Marine teaser reels
• 20” RIGID Spot style LED Light Bar
• Rupp Revolution Top Gun outrigger bases
• Rupp HD Carbon Fiber poles 18’
• Rupp HD Carbon Fiber Center Rigger
• One piece acrylic curtain enclosure

Cockpit:

• (6) 30 degree rod holders in cockpit
• (2) Hawse pipes on covering board top
• (2) 10” cleats mounted on side wall I cockpit
• Custom baitwell in transom
• Baitwells to feature laminated curved glass
• Custom livewell with recessed tuna tubes
• Genuine teak decking 
• 26” freeboard from transom to bow
• Full pass through transom door with gate
• Additional dive door in starboard hull side
• Under gunnel accent lighting throughout
• Release Marine triple seat with flip-up bolster
• Concealed access to shore power and water spigots under gunnels
• (2) In-deck fish boxes
• Dive ladder on transom
• Access to lazarette and gyro compartment
• Frigid Rigid cooler with slides

Console:

• Centerline helm with helm pod (faux painted)
• Glove box with USB charging outlets
• (4) Molded in drink holders
• (2) Simrad NSO 19" Touchscreen Displays
• Simrad Open-Array Radar with 4 foot array and RI-12 interface box
• Simrad 3D structural scan module
• Simrad 3D Thru-Hull StructureScan Transducers with fairing block
• Simrad S5100 Sonar Module
• AIRMAR B175-M Medium Band CHIRP Transducer
• AP 44 VRF Pack Medium Capacity
• Simrad RS90 VHF Modular Kit
• Simrad HS35 Wireless Handset
• (2) Digital Antennas
• Simrad NAIS500 with NSPL500 splitter
• Simrad NAC-2 Autopilot
• Simrad WM-3 SiriusXM satellite weather and radio module
• Fusion BB300 R Black Box Stereo with wired remote, USB, and aux. port
• JL Audio M700/5 stereo amplifier
• (2) JL Audio MX770 marine cockpit speakers
• (1) JL Audio MX650 marine cockpit speakers
• (2) JL Audio 10" marine subwoofer 175W
• FLIR MD-625 with joystick control unit
• GOST NavTracker System
• Wave WIFI RoguePro DB
• Linksys ES6350 Wireless Router
• Navionics Platinum Plus (Mexico/Central America)
• Navionics Platinum Plus (Central America West)
• RITCHIE 6" Super Sport compass mount
• Simrad VHF
• RIGID LED Light Bar
• Mercury Smartcraft Gauges
• Molded drink holders in console at helm
• Glove box with USB charging outlet
• C Zone display to control systems
• Molded foot rest
• (3) Release Marine chairs with flip up bolsters
• Barro Ultra Leather Fabric
• Molded in curtain track on console

Tow Package:

• Integrated solar panel charging system with monitoring capability
• WIFI Network Extender for connection to C-Zone up to 350’
• Custom Stainless Steel Towing Eye

Interior:

• Teak stair treads
• Quarter sawn teak interior
• Solid teak sole
• Cabinetry throughout interior with satin finish
• White painted surfaces
• Solid teak countertops
• Solid surface countertops with stainless steel undermounted sink
• Jabsco freshwater flush head
• Satin Southco Mobella McCoy door handles
• Satin Southco push button latches
• Recessed Imtra Ventura LED lights with white bezel in overhead
• Access to all electronics and AC panel
• Oversized bilge pumps
• Warning beacon light on top of tower to indicate bilge pump operation

General Construction:

• All bilges, engine room and equipment faired and painted with Alexseal Cloud White
• Walk Around construction
• Layer 1” Diab A500 foam on cabin
• Layer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

Exterior Surfaces:

• A buildup of Alexseal fairing products followed by Alexseal primer to a finished surface
• Topsides: Alexseal Cloud White
• Hull: Alexseal Light Gray
• Boot Stripe: Alexseal
• 1” solid stainless steel bumper metal

Hull Bottom:

• (2) Layers ½” marine grade Okoume plywood
• Layer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy
• Layers 1708 Vectorply biaxial fiberglass on keel and chine
• Layers 1708 Vectorply biaxial fiberglass inside bottom up through hull side
• Laminated Douglas Fir stringers

Hull Sides:

• Hull side 2 layers 6mm Okoume plywood Loyds type 1088
• Layer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
• Laminated Douglas Fir rib bands
• Laminated Douglas Fir chine
• Laminated Douglas Fir sheer clamp

Exclusions:

• Owner's personal items and belongings.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.