Engine
Yanmar 2GMF20
Total Power
-
Engine Hours
-
Class
Cruiser/Racer
Length
9.14m
Year
1987
Model
30
Capacity
-
Professional Yacht Sales International
Boat Details
Description
1987 Frers 30
Built by Carrol Marine
Designed by German Frers
Great dual purpose racer/cruiser that has been well maintained by very knowledgeable owner. If you like to do a little Racing along with just great sailing this one's for you.
Recent Upgrades & Service & Modifications to name a few:
Sellers Dream boat came on the market and could not pass her up. This is a great boat and all major lifting/systems have been addressed. Add your choice of Electronics and she is ready to get you to the finish line this season.
Contact us today for additional details, to schedule you personal showing or video walkthrough.
Built by Carrol Marine
Designed by German Frers
Great dual purpose racer/cruiser that has been well maintained by very knowledgeable owner. If you like to do a little Racing along with just great sailing this one's for you.
Recent Upgrades & Service & Modifications to name a few:
- Competition Composites Rudder and new Bearing
- New Chain plates & Stemhead fitting
- New Standing rigging
- Bottom Job w/ Petit Vivid Paint (10/2024)
- Keel bolts nuts removed/inspected & re-torqued to spec.
- Deck Stripped of all hardware & Fresh Paint Topside
- Deck was fully inspected for moisture & re-cored where needed
- Fresh topside paint with Epifanes two part
- interior Varnish was stripped & 8 Coats re-applied
- Flex-a-Fold 2 Blade prop
- Shaft, cutlas bearings, stuffing box & Coupler
- New Sail Technologies Radial main w/ Tides Track
- New Fuel Tank
- New Battery Charger
- Motor Mounts Replaced
- Stainless Exhaust Mixer
- Winches disassembled/Cleaned/greased
- Spinlock Rope Clutches
- LED Lights throughout (Cabin & Running Lights)
- Boom Cover
- Standard Horizon VHF
- New Portlights, Portholes & one new Hatch
- Main sheet & Vang blocks
Sellers Dream boat came on the market and could not pass her up. This is a great boat and all major lifting/systems have been addressed. Add your choice of Electronics and she is ready to get you to the finish line this season.
Contact us today for additional details, to schedule you personal showing or video walkthrough.
Contact Information
Please contact David Messina (Cell: 727-647-2262) at 727-647-2262
Other Details
From Sailboat Lab:
The Frers 30 is a 29.5ft masthead sloop designed by German Frers and built in fiberglass by Carroll Marine since 1987.
The Frers 30 is a light sailboat which is a high performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat. The fuel capacity is originally very small. There is a very short water supply range.
Main features:
Model Frers 30
Length 29.50 ft
Beam 10.92 ft
Draft 5.75 ft
Ratios
Sail area / displ. 20.28
Ballast / displ. 37.68 %
Displ. / length 175.26
Comfort ratio 16.33
Capsize 2.30
Hull
Hull type Monohull fin keel with spade rudder
Construction Fiberglass
Waterline length 26 ft
Maximum draft 5.75 ft
Displacement 6900 lbs
Ballast 2600 lbs
Hull speed 6.83 knots
Rigging
Rigging Masthead Sloop
Sail area (100%) 458 sq.ft
Air draft ?
Sail area fore 246.03 sq.ft
Sail area main 212.40 sq.ft
I 41.70 ft
J 11.80 ft
P 36 ft
E 11.80 ft
The Frers 30 is a light sailboat which is a high performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat. The fuel capacity is originally very small. There is a very short water supply range.
Main features:
Model Frers 30
Length 29.50 ft
Beam 10.92 ft
Draft 5.75 ft
Ratios
Sail area / displ. 20.28
Ballast / displ. 37.68 %
Displ. / length 175.26
Comfort ratio 16.33
Capsize 2.30
Hull
Hull type Monohull fin keel with spade rudder
Construction Fiberglass
Waterline length 26 ft
Maximum draft 5.75 ft
Displacement 6900 lbs
Ballast 2600 lbs
Hull speed 6.83 knots
Rigging
Rigging Masthead Sloop
Sail area (100%) 458 sq.ft
Air draft ?
Sail area fore 246.03 sq.ft
Sail area main 212.40 sq.ft
I 41.70 ft
J 11.80 ft
P 36 ft
E 11.80 ft
From HarborMoor
If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of FRERS 30. Built by Carroll Marine and designed by German Frers, the boat was first built in 1987. It has a hull type of Fin w/spade rudder and LOA is 29' 5".
Its sail area/displacement ratio 20.28. Its auxiliary power tank, manufactured by Yanmar, runs on Diesel.
FRERS 30 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about FRERS 30 and decide if it is a fit for your boating needs.
Its sail area/displacement ratio 20.28. Its auxiliary power tank, manufactured by Yanmar, runs on Diesel.
FRERS 30 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about FRERS 30 and decide if it is a fit for your boating needs.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Personal items are excluded from the sale, furthermore if not listed as part of the listing detail item(s) will not be deemed part of the sale.
Propulsion
Engine Make:Yanmar
Engine Model:2GMF20
Engine Type:Inboard
Drive Type:Direct Drive
Fuel Type:Diesel
Specifications
Speed & Distance
Cruising Speed:6.83kn
Dimensions
Length Overall:8.97m
Max Draft:1.75m
Min Draft:1.75m
Beam:3.3m
Length at Waterline:7.92m
Miscellaneous
Hull Material:Fibreglass
Tanks
Fresh Water Tank:113.56 l
Fuel Tank:45.42 l
Holding Tank:37.85 l