If you are looking for a brand new Lagoon Seventy 7 available now, this is the one ! In a superb Owner's Version with 3 cabins + crew quarters on starboard, you do not have to wait for 2 years ..Launched in February 2019, this large multihulls elegant and very spacious is fully proven and checked by the builder. She just left the Med for spending the winter in the Caribbean. The master suite is magic with her lateral door hydraulic, converted into a private teak plateform with direct access to swim ...The front cockpit forward with direct access from the salon is superb, the flying bridge gorgeous with different lounging areas, interior volumes are incredible, crew quarters are generous and the galley could easily compete with the ones on larger motoryachts. Each cabin is designed with care.No compromise on a such unit ; you will find all options and equipment expected, I invite you to ask for the detailed specifications !
The Specialist of the Cruising Catamaran above 50' since 1989
Cell. +33(0) 6 892 792 06 email@example.com
Please contact Catherine RELANDEAU at +33 (0)6 892 792 06
Additional Specs, Equipment and Information:
AIR DU TEMPS
Flag of Registry: France
Keel: Twin Keel
LOA: 23.28 m
Beam: 11.0 m
Minimum Draft: 1.90 m
Maximum Draft: 1.90 m
Fresh Water Tanks: (396 Gallons)
Fuel Tanks: (740 Gallons)
Number of single berths: 2
Number of double berths: 3
Number of cabins: 3
Number of heads: 4
Number of bathrooms: 4
Seating Capacity: 6
Wind speed and direction
Electric bilge pump
Manual bilge pump
Fresh water maker
Sea water pump
Shore power inlet
Manufacturer Provided Description
The deck and the hull are assembled and equipment inside the boat has been installed. The time has arrived for the Seventy 7 to leave the production area where it has been for several months for mast stepping, the final phase for preparing Lagoon's newest ship before its launch. The mast is positioned horizontally to position the spreaders, attach the rigging and cables, install the electrical systems and put the main sail in place.
Fitting the deck
Before mast stepping, the deck must be fitted, including installing the winches, cleats and blocks… all the equipment needed for the standing and running rigging.
Next, the mast is prepared by positioning the spreaders and standing rigging, and attaching the running rigging. Afterwards, we install the electronics and electricity (radar, antennas and lighting) and prepare the hydraulic furlers. Then we prepare the boom (attach sheets and reefing lines) and install the main sail. We finish by placing the slings and verifying the shafts.
The actual mast stepping phase requires five people and is done on dry dock. It begins by slinging the mast which is strapped up and attached to the crane to be lifted in vertical position and placed above its position. Once in place over its shoe, it is connected to the stays, lower and intermediate shrouds and detached from the crane.
To finish, the lower and intermediate shrouds are tightened and the initial adjustments are made. The final adjustments are performed after the launch.
Characteristics of the rigging of the Seventy 7
The Seventy 7's rigging consists of: - Aluminium mast with three spreaders. Height 32 metres - Aluminium boom (optional carbon canoe boom) - Standing rigging made of Kevlar - Running rigging made of Dynema - Genoa hydraulic furler
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.