Hand laminated infused vinylester solid glass hull with cored transom. Flag blue hull, Awlgrip painted (2017). Fiberglass molded rudder with core. Painted boot top (White Awlgrip) and pale gold cove stripe. Lead ballast full keel is externally bolted with SS bolts and the rudder pintles and gudgeons all are high grade 316 stainless steel. Deck is laid up fiberglass cored with end grain balsa and finished in “Cream” colored Awlgrip with non-skid additive. Custom cast bronze hardware includes a 10” hollow cleat on foredeck, 2 solid 7” aft cleats and a pair of fitted bow chock.
Interprotect epoxy bottom sealer with epoxy primer and green (Petit Hydrocoat ECO) antifouling paint
Varnished teak inner transom
Natural teak toe rails
Large, deep and roomy 9’ long cockpit with 6 ½’ seats angled in harmony with the coamings for comfort. Seats, coamings and trim are teak. Deep bilge compartment is easily accessible for pumping through a lift out hatch in the sole. The inside of the boat has two separate hand laminated molded liners that are bonded to the hull serving as structural bulkhead and stiffeners. All visible surfaces inside the hull are finished in easy to clean white Gelcoat.
Varnished ash tiller
Teak boom crutch with stowage
Teak decking in cockpit sole
Seat extended with shelves and drink holder (Port and Starboard)
Custom varnished teak doors with removable hinges
The mast is keel stepped and includes two internal halyards and two topping lift (main & jib). All halyards, Reefing controls and jib sheet are led aft over cuddy top and are easily controlled from the safety of the cockpit. Mainsheet tackle is a 4:1 aft boom control leading to a fairlead with Cam cleat near the helmsman. Standing rigging is 1 X 19 stainless steel shrouds with bronze turnbuckles.
Running rigging is low stretch braided rope.
Main sheet- Harken traveler system
Marconi rig-Carbon mast jib club (Awlgrip painted)
Schaeffer Roller furling (2016)
Painted aluminum boom
Mast head Windex
Burgee halyard with varnished ‘Pig Stick’
Locking winch handle and stowage pocket
SAILS AND CANVAS
Sails by Maine Sailing partners:
Mainsail with one reef
Self tending furling jib
Spinnaker Package with, rigging and carbon pole
Cockpit boom tent/mainsail cover with zipper and hardware (Toast colored Sunbrella)
Jib sail cover (Toast Sunbrella)
The cuddy cabin includes two outboard shelves with fiddles, hanging hooks for lines and foul weather gear. Positive flotation in three watertight compartments with inspection hatches; one forward of the mast and one under the sheet/stern deck can also be used for stowage the third compartment is located under the cockpit soles and is not accessible to stow gear but has an inspection port.
Manual bilge pump with handle mounted in cockpit bilge sump
Fenders with custom fender covers
Bulkhead mount Plastimo Mini Contest Compass
Torqueedo Travel 1003 electric outboard with custom removable stainless steel bracket (Gunwhale mount)
Galvanized steel cradle
COMMENTS:Ayita has been professionally cared for and is a beautiful example of the Pisces with a marconi rig. Winter 2019 upgrades include exterior wood teak professionally varnished and bottom painted. Ayita is in beautiful condition and ready to launch.
Please contact Jean Beaulieu at 207-244-3374
Additional Specs, Equipment and Information:
Builder: Classic Boat Shop
Designer: Chuck Paine
Hull Shape: Displacement
LOA: 21 ft 0 in
Beam: 7 ft 1 in
LWL: 16 ft 4 in
Minimum Draft: 2 ft 11 in
Displacement: 3250 lbs
Ballast: 1600 lbs
Engine Type: Other
Engine/Fuel Type: Other
Propeller: 2 blade propeller
Fuel Tanks: 1 Aluminum (8 Gallons)
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.