This beautiful fiberglass cruising yacht was designed by Pieter Beeldsnijder and built by the Ta-Yang Yacht Building Company in Taiwan in 2001. "ROY" is being put on the market by its original owner that had the boat built to his specifications. Cutter rigged with a Selden mast and electric hydraulic furling for the Liesurefurl boom furling main, staysail, headsail and roller furling spinnaker . Powered by a Yanmar 140hp diesel, Vetus bow thruster and an 8KW Onan genset. Fully equipped navigation station and a galley the envy of many onboard chefs with large refrigerator and separate freezer, microwave, 3 burner propane stove with oven, trash compactor, etc. Sleeps 6 in 2 double and 1 twin berth cabins. In exceptionally good condition as ROY has been fastidiously maintained. The bottom was just painted and new zincs installed. A professional survey was performed in May 2018 while the boat was on the hard.
contact Dan Miller at 360-701-6014 or email@example.com for an appointment or more information.
Please contact at 360-352-2007
Additional Specs, Equipment and Information:
Designer: Pieter Beeldsnijder and Robb Ladd
Hull Shape: Monohull
LOA: 57 ft 6 in
Beam: 16 ft 1 in
LWL: 45 ft 11 in
Maximum Draft: 7 ft 2 in
Displacement: 66000 lbs
Ballast: 17600 lbs
Dry Weight: 66000 lbs
holding tank - 30 gallons fiberglass with macerator and y-valve
Heart Tank Tender - electric monitoring tank gauge system
water heater 10 gallon with heat exchanger
2 propane tanks
Anchor and Rode
anchors - stainless steel plow type with 3/8" chain rode, Aluminum Fortress #FX-55
anchor windlass - Maxwell 2201 capstan with foredeck foot controls
300' chain, 250' rode
foredeck raw water washdown
Comments - Additional Equipment
current survey done 5/18 when boat was hauled to be bottom painted and topsides cleaned and polished
the above and below water hull was found to be sound and free of damage or defects with far less wear than expected.
new zincs installed 5/18
custom transom mounted cradle for the dinghy with 12v Browns Systems WC-1200 davit crane
dinghy is an 11' Boston Whaler with 25hp 4 stroke Mercruiser outboard
Rail mounted propane BBQ
2 large Yeti coolers on the afterdeck also used as bench seats for the custom teak table
Seachest located in the engine room for some of the raw water intakes
Canvas - mainsail cover, cockpit enclosure with glass windshield and wiper, winch covers, hatch covers, davit crane cover, tender cover
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.