PRICED FOR QUICK SELL
This BUDDY DAVIS 78’ Sportfish, Motor Yacht EPIC lives up to her name. Built for a discerning sport fisherman with a flair for extended cruising. Back in 2000 before many custom builders and production boat builders were building sportfishing boats this large, EPIC was a special project and a sight to be seen. In today’s market, this 2000 BUDDY DAVIS 78’ SPORTFISH represents U.S. custom boat quality, a huge fishing and travel platform, and great value.
She has 4 staterooms with 5 heads. You can comfortably sleep 8 people aboard with 2 separate crew. Built from Buddy Davis with a reinforced hull with added stringers and 2,100 gallons of fuel for a range of 900 nautical miles. Features like stabilizers, a full width staircase to the bridge and a day head accessible from outside set this boat apart from other sportfish boats of her size. She is as equally comfortable going out fishing for the day as being used either in the Mediterranean or Caribbean Sea!
EPIC is part of a larger fleet of privately-owned yachts where she is professionally cared for. This BUDDY DAVIS 78’ SPORTFISH has a full-time captain. She is well cared for and consistently upgraded. EPIC has an impressive travel resume. She has spent some time in the Mediterranean and would be a great fit fishing or cruising in any of the world’s oceans.
EPIC has had no expense spared in her maintenance and has had a recent yard period in 2021. She is in excellent turn key condition.
The cockpit and raised mezzanine area onboard “EPIC” is large and impressively laid out. It has features that lend itself well to both the tournament fisherman and the cruising family. These features include…….
Three small steps up from the cockpit brings you to the mezzanine area. This raised perch offers a great view of the cockpit and fishing activities. It also doubles a nice spot to hang while underway and a dockside social area. Other highlights include:
Standing on the mezzanine you enter the main salon through the brand new high gloss teak door. This main level incorporates the salon, galley, and dinette in a familiar, social, sportfish layout. Immediately upon entering there is a set of spiral stairs that lead up to the weather protected, climate controlled enclosed flybridge. To port is an L shaped sofa with storage underneath and a hi/lo coffee table. The sole is sculpted carpet with a runner on top. The woodwork is impressively done in satin finished teak.
There are AV components and storage in the starboard side cabinets with a large flatscreen TV. After the current owner purchased her, all of the countertops were updated to granite and some other customizations ordered. A custom athwartships bar top was added just below the galley countertops on the salon side. This has additional storage cabinets underneath and two custom bar stools.
One small step up leads us to the dinette and galley. The sole of this area is now a high gloss teak and holly. To port, enclosed in a teak cabinet with granite top is a Scottsman ice maker. Just fwd of that to port is a L shaped dinette and granite table top.
To starboard is a galley equipped to satisfy the hungriest of fishing crews. Her features include:
Just forward of the galley is a large multi-purpose room that doubles as a huge walk in storage room and a crew stateroom. She is outfitted with:
All the way forward on the port side of the main deck is a stairwell that descends to the lower accommodations. Once below the wood tone changes to a lighter tone honey maple with burlewood trim and drawer faces. It is a nice contrast to the darker teak up top and gives it a more open spacious feel. The four stateroom four head layout is well done.
Once below the wood tone changes to a lighter tone honey maple with burlewood trim and drawer faces. It is a nice contrast to the darker teak up top and gives it a more open spacious feel. The four stateroom four head layout is well done.
Once below, just to port is a full head open to the hallway with a second private entrance from the portside bunk room.
Starboard Guest Stateroom
Forward VIP Stateroom
The master stateroom is aft and lives up to her master billing. Some of her highlights include:
Enclosed Flybridge and Skylounge
Helm and Electronics
Buddy Davis was a young charter captain some 25 years ago when he started working in the off season alongside local builders on North Carolina's treacherous Outer Banks. He already knew that any vessel going to sea in these deadly waters must contend with vicious rips and currents, plough through chaotic walls of water that sometimes tumble into the Carolina inlets, and be built to stay high, dry and sturdy if paying guests were to come back as repeat customers.
You could say he had a flair for flare, a talent that more than any other feature typifies the mature Davis style and could be seen with dramatic effect when the Davis 78' Sportfisherman. Viewed from dead ahead at water line level this was a shape that looked more like a flared vase than a conventional sportfish yacht.
It is a design from a man enlightened by the wisdom that comes only from hard experience in heavy seas. Quality in all worthwhile manmade objects and particularly in boat building always means top dollar, because quality demands the best design, construction, materials, equipment and craftsmen. Any get-rich-quick builder can throw a load of inferior installations and equipment into the mix but in the long term it makes little sense for an owner who cares about performance and, in the longer term, the boat's resale value.
What you get in the Davis 78 is an ocean-going yacht designed and build to provide comfort, reliability and optimal performance for big game fishermen who want luxury and a stable fighting platform in the same hull.
On this yacht the benefits start in the capacious cockpit, which is free of clutter, has abundant refrigerated and gear storage, and features and International fighting chair (with rocket launcher!), flush-mounted Rupp rod holders in coaming boards, live well with macerator, icemaker, salt and freshwater washdowns, four-drawer tackle center, bait preparation counter, phone and power outlets, all contained within a handsome and teak covering boards over teak coaming. Steps from here lead to a mezzanine deck above and forward of the cockpit; it has a head/shower to starboard, swing safety gates to port and starboard, and a freezer under bench seating on the portside. Entry to the enclosed salon is via a starboard door on the mezzanine.
This reveals an interior that's far removed in concept and atmosphere from the gladiatorial arena that partly defines a sportfish cockpit. Here we find elegance and comfort, climate controls, supple leather upholstery, a large bar with wine cooler, entertainment centerand, one step up from the salon deck, an L-shaped dinette. The adjacent full-service galley has a four-burner cook top, microwave and convection ovens, a built-in coffee maker, four refrigerated Sub Zero drawers and lockers; galley flooring and countertops are polished granite.
There is a utility room forward of a galley area; this also serves as a pantry and contains a 12-cubic foot industrial grade stainless steel freezer, storage lockers and drawers, washer/dryer and the main electrical breaker panel. A door to starboard leads to the mate's single-berth cabin, which has storage drawers above and under the bunk, a hanging locker, audio/visual center and head.
Owner and guest accommodation is reached by a companionway leading forward and down from the salon deck. The full-beam master suite is midships and two steps below the guest staterooms. The Davis 78 featured at the Lauderdale show had pleated overheads around a mirror; the bulkhead behind the queen-sized bed, which could be raised for access to storage, was also mirrored. The master bathroom had double facilities-two heads, a tub and two showers, with twin granite topped vanities; the gold-plated fixtures are from Grohe.
Both guest staterooms, one to starboard and a VIP suite forward, have queen beds, entertainment centers, private heads with show stalls and granite-topped vanities. The captain's cabin below midships on the port side has a double berth, audio/video system, and access to a head/shower.
A spiral staircase leads from the salon to an enclosed wheelhouse/lounge, which can also be reached by external ladders extending from the cockpit to the tuna tower and its helm station. The same quality of finish throughout the interior is found in the lounge, where there is a wet bar and entertainment center with a satellite TV receiver on a retractable hydraulic lift. A door leads from the lounge to the outside helm station and an observation.
It was from the tuna tower helm position that the captain gave his orders to depart for a sea trial. As we headed for the channel to the open sea we realized that there was a strange silence at this elevated height. Our twin 1800 HP diesels were inaudible; not only that, the absence of vibration made us doubt that we were actually underway.
We met five-foot seas in open water but the Davis-designed bottom neutralized these and we were soon gliding comfortably at a cruising speed of 25 knots across the surface, so comfortably in fact that it seemed to make little difference whether we ran with or against the seas, which is an indication of the design strength of the deep, narrow entry.
All things considered, the Davis 78 is a true luxury yacht in furnishing and fixtures, and one that seems untroubled by hard going. There can be little doubt that she will attract an exclusive following among shrewd buyers who appreciate the value of quality, comfort, performance and durability.
The hull and superstructure were painted with Awlgrip in 2009. There was a large stainless steel portlight installed in the master stateroom for natural light and ventilation. The transom is a beautiful varnished teak veneer.
- MTU 16v2000 M90 (W4 just completed on both main engines)
- Racor 75/1000 Max fuel filters for main engines
- Racor 500MA fuel filters for generators
- Twin Disc gearboxes
- American 32 hp bow thruster
- 2 X Seaward 20 gallon water heaters
- Walvac central cleaning system
- Octomarine compact direct-plumb softwater system (2010)
- WaterMaker, Inc. 1,100 gpd watermaker
- Naiad stabilizers
- Cruiseair air conditioning system
- 2 X Northern Lights 32 kW generators (Recent full service completed.)
- 2 X Sentry 24v 50 amp battery chargers
- 8 X 12v gel/AGM batteries
- ASEA AC-25 3 phase shore power converter unit
- Glendinning remote control cablemaster syste with 60' 100 amp cable (2010)
- Underwater lights
- Murray 4 way rocket launcher/fighting chair
- Covering board and cockpit rail rod holders
- Cockpit side covered rod storage
- Refrigerated stainless steel transom fish box
- Built-in ice box with shaved ice feed
- Built-in live bait well
- Nautica 15' Widebody RIB with Yamaha 2-stroke 90 hp outboard
- Marquipt 2500 lb tender davit
- 2 X DBC six man life rafts
- ACR Global Fix 406 EPIRB
- McMurdo G5 406 EPIRB
- CO2 engine room fire suppression system
- Lifejackets, flares, medical kit, liferings
MAINTENACE / REFIT LIST
M/Y Epic Significant Maintenance List
(Not included are routine items such as zincs, fluids, fuel filters etc)
Turbo flaps were sticky and freed up. Small fuel leak on stb manifold sealed.
W4 service - Heat exchanger plates cleaned, cylinders borescoped, injectors tested and replaced where spray pattern not sufficient, valve clearance. Oil & filter change, coolant drain and flush.
Injector replaced by Motor Services Hugo Stamp
Heat exchangers cleaned
All engine mounts replaced by Motor Services Hugo Stamp
Marine interface module replaced on Starboard main engine by RPM Diesel.
Oil samples pulled from Mains, Gearboxes and generators. All within Specs.
Oil pan gasket replaced on Port. Oil and filters changed. Performed by RPM
Master battery replaced on Starboard DDEC module.
2 new DDEC displays installed in tower station.
2400 hrs service on port gen. Rebuild Injection pump, replace injectors, clean heat exchanger etc. Performed by RPM Diesel.
2400 hrs service on stb gen. Rebuild Injection pump, replace injectors, clean heat exchanger etc. Performed by RPM Diesel.
Mounting rings removed and mufflers modified to take wider 3 inch mounting rings. All silicone and clamps replaced, and system reassembled. Note. Keep a 16 inch ball fender on board just in case.
All fuel tanks cleaned and fuel polished.
Rudders dropped, seals and bearings replaced. Done by High Seas Yacht Service
Shafts checked for straightness, props checked for balancing. Cutlass bearings replaced. Done by High Seas Yacht Service at LMC.
Engine and running gear alignment checked again by High Seas Yacht service
Propellors removed and tuned to class s.
Shafts and rudders removed. All bearings and bushings replaced, realigned and sea trialed. Performed by High Seas Yacht Service
Stabilizers removed and serviced with new seals etc. Rams rebuilt, heat exchanger cleaned. Hoses replaced. Done by high Seas Yacht Service.
Directional valve body serviced with new seals
All air handlers and related ducting replaced. General service and tuning of system. Done by Beard Marine
Chillers serviced and trac circulated through seawater lines. All engine room chilled water pipe insulation replaced. All air handlers serviced. Performed by Beard Marine
Serviced AC chiller condensate drain system
Eskimo 600 Ice Maker
Unit removed from vessel and bench tested. Serviced, recharged with weighed amount of gas and reinstalled when repairs completed to damaged sub floor. New level controller installed. Operating well.
Engine room Lighting
Old CFL lights all removed and replaced with 24VDC LED strip lights and channels. 24vdc circuit connected directly. 120vac circuit fed Via step down transformer.
LED lights also installed in FWD crew bilge, under dash in wheelhouse and steering flat.
Wheelhouse Windscreen Wipers
All wiper arms replaced with longer arms to improve screen coverage. All blades replaced.
Installed Rupp 5ft hydraulic rams. New mounting collar installed and pivot bushes replaced. All external braided Hydraulic lines replaced.
Bilges and Raw Water plumbing
Many aw water strainers removed and relocated. Raw water pumps for fish box and drinks fridge relocated. Skimo upgraded to ¾ in hose. March pumps replaced (Drinks box 120VAC and Rear Fish Box 240VAC)
Tuna tube pump relocated to improve access to steering components. All hose replaced and distribution manifold cleaned, checked and reinstalled.
Octomarine water softener fully serviced
Adjusted steering tie bar. Both Ball joints replaced and bar reinstalled.
Installed Robertson AP20 Autopilot in tower station. Replaced rudder angle indicator.
Hydraulic ram base mount removed and reversed in order to balance steering geometry. Previously 37 degrees to STBD and 22 to port. Now within 3 degrees each way.
Rudders removed and serviced. Bushing replaced. Toe-in checked and tie bar adjusted accordingly.
New ships Ultra quiet compressor installed under dash to feed ships horn.
Ships Electric blinds
Main salon blinds removed and serviced.
New electric motor fitted to High Pressure pump, Pump head bench tested by Watermakers, Inc and performing well. Motor capacitors remote mounted and pump/motor assembly relocated under starboard engine bank. Some plumbing relocated and hoses checked.
Membranes removed and bench tested By Watermakers, Inc. leaking fittings replaced. All 3 performing well.
All 8 cameras replaced with multi system (analog and digital) cameras with Night vision. Multiplexer replaced also but still Analogue.
All three underwater lights and drivers removed and replaced with SeaVision white L.E.D. lights.
Upgraded to Bennett Auto Trim Pro System with dual pumps. Two actuators replaced and sensor wires added. The Auto trim pro will extend tabs as the boat accelerates to keep the bow down. It will also retract when the boat slows again. It will also adjust tabs to compensate weight shifts at speed. All plumbing replaced and HPUs relocated for easier access/ top up. Visual tab position indicator added to wheelhouse station.
Main engine sea cocks stripped, cleaned, serviced and replaced. Now two finger operation.
All other through hulls replaced. Performed by All Points
Bow thruster system serviced. Load sensing valve rebuilt. System pressure tuned. Performed by High Seas Hydraulics.
New bottom paint, prop speed and zincs