Beautifully presented 1996 Vancouver 36, designed by Tony Taylor (Camper & Nicholson) and built by Northshore Yachts in the UK. A truly excellent example of these renowned heavy displacement blue water cruising yachts with encapsulated long fin lead keel and skeg hung rudder. No expense has been spared on an extensive refit in 2017/18 which included the hull being faired / resprayed, a major engine service / overhaul, refurbished cabin and new Treadmaster decks, standing rigging / furlers, foresails, wind generator, radar / chartplotter, windvane, deck hatches, holding tank, upholstery and much more. British Part 1 Registered. Must be seen to be fully appreciated.
Please contact Martin Lovell at +44 (0)1481 716880
Additional Specs, Equipment and Information:
Dimensions
LOA: 36 ft 0 in
Beam: 12 ft 0 in
Engines
Total Power: 48 HP
Engine 1:
Engine Brand: Yanmar
Year Built: 1996
Engine Model: 3JH2-TE
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: 3 blade propeller
Drive Type: Direct Drive
Engine Power: 48 HP
Accommodation
Number of heads: 1
Electronics
Depthsounder
Log-speedometer
Wind speed and direction
Repeater(s)
Plotter
Autopilot
Compass
GPS
VHF
Radar
Radar Detector
Radio
CD player
Covers
Mainsail cover
Spray hood
Lazy bag
Lazyjacks
Dimensions
Length overall: 36’0” (10.97 M)
Waterline length: 28’6” (8.68 M)
Beam: 12’0” (3.65 M)
Draft (fin keel): 5’7” (1.70 M)
Displacement: 9,296 Kg
Tanks
Diesel (s/s tank): 59 Gal (270 Lt)
Fresh water (2 x s/s tanks): 79 Gal (360 Lt)
Waste (s/s tank): 15 Gal (70 Lt)
Mechanical and electrical
48 hp Yanmar 3JH2-TE diesel engine driving bronze 18" fixed 3 bladed propeller on s/s shaft with rope cutter
Full engine instrumentation (2228 hours) and single lever control
Engine removed for a major service and overhaul in 2018 which included a new propeller shaft / coupling, engine mounts, Racor fuel filter, exhaust riser and serviced water pump
Whitlock wheel steering with hide covered wheel and emergency tiller (brake refurbished 2018)
All seacocks stripped down and serviced (2018)
12 volt DC electrical system (3 batteries) with isolator switches, Clipper BM-1 battery monitor and cockpit / chart table sockets
Electrical wiring tidied up and mast rewired (2018)
240 volt AC shore power system with Sterling Power battery charger and ring main (UK sockets)
Rutland Windcharger mounted on s/s transom post (2018)
Pressurised hot and cold fresh water system (calorifier / immersion)
Manual back-up fresh water pump at galley
Holding tank (2018) with overboard and deck pump out
Eberspacher diesel cabin heating (serviced 2018)
LED lights (2018)
Lofrans electric anchor windlass with canvas cover
Alpine stereo radio / CD player with Sony Xplod 250w amplifier, subwoofer and saloon speakers
Spars and sails (cutter rig)
Kemp double spreader deck stepped mast, boom and rod kicker
Kemp telescopic spinnaker / whisker pole stowed vertically on mast
Selden RCB full batten mainsail system
Discontinuous s/s standing rigging with Furlex 304S jib and 204S staysail furling / reefing systems (2018)
Braid running rigging (some replaced in 2018)
Lewmar 48ST genoa / primary winches (2)
Lewmar 30ST spinnaker / secondary winches (2)
Lewmar 16ST halyard winch on mast
Lewmar 30ST halyard / reef line winches (2) with Spinlock clutches (12) on coachroof
Mast steps
Sail wardrobe includes roller jib (2018), roller staysail (2018), full battened mainsail (2016), cruising chute with snuffer and storm jib
Mainsail lazy bag / boom cover with lazy jacks
Navigation equipment
B&G multifunction display (radar / chartplotter) on wheel pedestal with scanner mounted on s/s transom post (2018)
Raymarine A65 chartplotter (chart table)
Philips AP Navigator Mk9 GPS (chart table)
Autohelm ST7000 autopilot (cockpit)
Hydrovane self steering windvane (2018)
Autohelm speed, depth and wind speed / direction instruments (cockpit)
Autohelm multi-function repeater (chart table)
Raymarine Ray55E DSC VHF radio (chart table) with Hawk masthead antenna and cockpit speaker
B&G AIS
Back-up Nasa AIS Radar
Clipper Navtex (chart table)
Whitlock pedestal mounted compass
Barometer and temperature / humidity gauge
Navigation lights including masthead tri-colour / anchor light, combined steaming / deck light and chart / night lights
Accommodation
Traditional teak interior with 6’3” headroom, teak / holly cabin soles, new upholstery (2018) and accommodation for up to 7 in 3 cabins including saloon
Forward cabin with large double ‘V’ berth with infill cushion and new deck hatch (2018)
Very large heads compartment to port with Jabsco marine toilet (2018), wash hand basin (new taps 2018), shower (2018), teak grating and ECS extractor fan
Spacious open plan saloon with new deck hatch (2018) and comfortable ‘U’ shaped dinette arrangement to port (settee berth with lee cloth and stowaway pilot berth)
Settee / pilot berth with lee cloth opposite
Galley to rear of saloon on port side with large Isotherm chest fridge, gimballed Plastimo Neptune 2000 2 burner gas cooker / grill / oven and new s/s sinks (2), taps and worktops / splashbacks in 2018
Forward facing chart table and navigation station with seat opposite
Aft cabin with large double berth
Good access to engine compartment under companionway steps up large well protected self-draining teak cockpit with high coamings and teak grating
Wheel pedestal with folding teak table
Good access to newly laid Treadmaster decks (2018)
Ample stowage throughout yacht including hanging wardrobes in both cabins, separate wet locker, drinks cabinet, lockers under seats / berths and cockpit lockers (2)
Safety equipment
Seago 4 man canister liferaft mounted in s/s cradle on pushpit
McMurdo SmartFind 406MHz GPS EPIRB
Firdell Blipper radar reflector fitted to front of mast
Wire jackstays on side decks
Safety harness attachment points in cockpit (4)
Jonbuoy inflatable Danbuoy
Plastimo lifebelt with light
Manual fire extinguishers (2)
Fire blanket
Automatic electric bilge pumps (2)
Manual bilge pump
Carbon Monoxide alarms (2)
Equipment
Seago inflatable tender with oars
2.3 hp Honda 4-stroke outboard motor with pushpit bracket and canvas cover
Canvas wheel pedestal and cockpit table covers
Sprayhood with s/s frame and grab rail (2018)
Cockpit dodgers (2018)
Cockpit cushions (2018)
Canvas deck hatch covers
45lb CQR anchor with chain (50 M)
Danforth kedge anchor with chain and warp
Double s/s bow roller / stemhead fitting
Warps and fenders
Henderson manual bilge pump
S/s transom mounted folding boarding ladder
S/s anti-chafing strips in way of mooring cleats
S/s stanchions and guard wires with port and starboard entry gates
Ensign staff
Telescopic boat hook
Disclaimer
In this case we are acting as Brokers only. The Owner is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective Purchaser is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.