The Sadler 32 is a “fin and skeg” design that is well known for her abilities in pretty much all conditions. The current owner has spent a while updating her, ensuring cosmetically she is good with new upholstery in saloon, that the engine is in good and serviceable condition, fitting a 220v shorepower system, replacing some of the instruments, new stackpack, new stanchions and guard wires and some new running rigging.
White GRP hull with a black cove line. External cast iron deep fin keel and skeg hung rudder. Tiller steered. White and grey grp decks with moulded in non slip. Glued and screwed on non slip cockpit seating. Teak and mahogany internal joinery. Built in 1979 by Sadler Yachts.
Watermota Sea Panther 30hp diesel engine. Heat exchanger cooling and wet exhaust. Hydraulic gearbox to shaft driven, folding, 2 bladed bronze propeller. Cruising speed approx. 5 knots with max speed approx. 7 knots. Recently serviced.
Fuel - 12 gallons
Water - 40 gallons
Deck stepped masthead sloop.
Silver anodised alloy mast and roller reefing boom (sheaves at mast step recently replaced). Sailspar furling headsail system.
Stainless steel wire standing rigging – last replaced 1998.
Deck stowed spinnaker pole and Lewmar winches.
Sails cleaned, checked and serviced
Mainsail – Crusader
Furling Genoa – Butler & Verne
No 1 Jib – Crusader
Spinnaker No 1 - Black/white - Ripstop – with snuffer
Spinnaker No 2 – Red/white - Ripstop
12 volt system – 1 x 12 volt domestic batterery and 1 x engine start battery. Distribution board with circuit breakers. Alternator charging. 12 v LED interior lights and navigation lights.
240 volt system - 240 volt shore power and 2 x 240v outlets
Forward cabin: V-berth with infill and storage under, red vinyl upholstery. Heads: ITT Jabsco toilet, washbasin with pressurised cold water and wet locker opposite, to starboard. Saloon: U-shaped settee to port, settee berth to starboard. Fixed central table with foldiung leaves. Recent, cream upholstery throughout the saloon. Galley: aft to port with Flavel vanessa gimballed gas stove with 2 burners, oven and grill. S/steel sink with cold pressurised fresh water. Insulated cool box. Navigation station: Aft to starboard, large chart table with provision for instrumentation and wide quarter berth aft.
Helmsmans compass – new 21018
Clipper depth sounder – new 2018
Clipper log and speedo - new 2018
Standard Horizon VHF DSC radio with built in GPS
Stainless steel pulpit and pushpit. New stanchions and guardwires fitted in 2018. Single bow roller. 10kg anchor, chain and warp. Draining anchor locker. Bow and stern morring cleats. Various mooring warps and fenders. Coachroof grabhandles in teak. Folding sprayhood. New mainsail cover (2018). Teak slatted cockpit soile. Large cockpit locker.
Fire extinguisher (not guaranteed in date).
In this instance Fox’s Yacht Sales are acting as brokers for the vendor. The vendor has provided the information and whilst we endeavour to ensure the accuracy, the details are believed to be correct but are not guaranteed. Any prospective purchaser is advised to check the boat specification thoroughly and to employ at their expense a qualified marine surveyor and/or engineer to check the specification and condition of this craft and its equipment.