Beneteau Oceanis 38.1 available for Southampton Boat Show this year.
The Oceanis 38.1 cleverly combines practical features, performance and elegance. The Oceanis 38.1’s chined hull offers particularly surprising cruising comfort. Good and taut to aft and low on the water, the rigidity under sail of this cruiser takes her further and faster, with exceptional stability. It is a real joy to have two helm stations, a mainsail arch, controls led aft, a self-tacking jib option available for short handed sailing and a huge swim platform on a sailing yacht this size.
This particular example enjoys the large 2-cabin layout, L-shaped galley and many optional extras including smart looking Pearl Grey hull, mainsail arch, Exclusive and Electronics packs to name but a few. COMPREHENSIVE FINANCE AND PART-EXCHANGE DEALS AVAILABLE. Additional options can be added by quotation. All of the pictures are of a sister ship.
Please contact at +44 (0)1489 854455
Additional Specs, Equipment and Information:
Beneteau Oceanis 38.1
Hull Shape: Other
LOA: 38 ft 0 in
Beam: 13 ft 1 in
Maximum Draft: 6 ft 10 in
YANMAR DIESEL 29HP Cruising speed: 6 knots approximately Maximum speed: 8 knots approximately Sail drive to propeller Fixed three bladed propeller Bowthruster
ELECTRICS: Full 220v system - interior sockets, shore power socket 40 amp battery charger 3 x 80ah service batteries 1 x 12v Engine start battery
TANKAGE: Fuel capacity 130 litres Water capacity 130 litres Holding tank 80 litres
WATER SYSTEM: Pressurised hot and cold water system
All figures approximate
NAVIGATION AIDS: B&G 7" Zeus multifunction screen to port helm (Triton moves to stb) B&G Triton display at stb helm Wind sensor (wind vane, anemometer) B&G sensor (log, speed, temp) Windex B&G V50 VHF with AIS receiver at Chart Table B&G NAC3 Autopilot Hawk VHF Antenna
GROUND TACKLE: Anchor -Delta 16kg Anchor chain 10mm x 30m Anchor warp - 16mm x 50m includes splice to chain Electric windlass & remote control. Cockpit windlass control with chain counter
GENERAL EQUIPMENT: Cockpit table Solid Wood Slatted Cockpit Floor Solid wood slatted aft platform Solid wood slatted helm seats White PVC covers for steering wheel and console PVC cockpit table cover (white) Hot/cold cockpit shower Fusion stereo with interior and waterproof exterior speakers Oceanis Exclusive trim level 2018 Oceanis Electronics pack 2018 Oceanis 38 mooring kit (including mooring lines and fenders) Sprayhood 2 x Halyard bags
SLEEPS UP TO 5 IN TWO CABINS AND THE SALOON (optional)
Interior trim is in Alpi Fair Oak with Chine Moka upholstery and Taupe wall linings in saloon and cabins.
The owners cabin is now accessed by a double door, the owner cabin offers wonderful privacy. This new separate space still gives a pleasant view forward when the doors are open, lit from both sides by large hull windows. With a headroom of 1,95 m / 6’5’’ double access doors with island double bed 1 Hanging locker (To starboard) 1 Cupboard with shelves (to port) Valet tray - Open shelving - Drawer under the bed Opening deck hatch with mosquito blind 2 Hull portholes with curtain, 4 Reading lights.
The saloon has an L-shaped saloon bench seat with storage under. The saloon table is a one piece top and high level closed units port and starboard add to the storage. Indirect LED lighting in saloon Chart table with opening top and reading light. The chart table has been redesigned, practical and effective, it folds away to leave more room in the saloon.
The heads and shower are entered through their own separate doors from the salon. The shower has a seat with storage beneath, cubbies for soap, shampoo and the like, and an opening port-light.
The new L-shaped galley makes a facing seat saloon arrangement possible. The space has been well optimised to allow eight people to sit around the table. The galley has laminated worktop, stainless steel sink with hot/cold water mixer tap and a stainless steel two-burner gas hob / oven and grill on gimbals. Front-opening refrigerator (12 V - 130 L) cubby hole locker and bin.
All figures approximate.
BENETEAU OCEANIS 38.1 BUILT BY BENETEAU FRANCE IN 2018
CONSTRUCTION: Pearl Grey GRP hull White GRP deck and superstructure Teak laid cockpit floor, aft platform and seating Twin leather covered steering wheels Stainless steel guard rails with amidships opening gates to port and starboard Twin spade rudders Fin keel with bulb Deep Iron Keel
9/10 anodized aluminium deck stepped mast 2 aft-swept spreaders Anodised aluminium boom Discontinuous stainless steel standing rigging Rigid boom vang with tackle Genoa furling system with drum on the deck Rigging run back to cockpit (except boom topping lift) Complete running rigging: Main halyard, genoa halyard with clutch on mast and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets, Single line reefing system Asymmetric Spinnaker Gear 2nd Bow roller and bobstay Assorted clutches and Jamming cleats 2 halyard bags Fixed composite arch, with incorporated LED lighting Flag Halyards