Sunbird International Yachts Sales are please to present to the market this lovely Sweden Yacht 36
Sweden Yachts 36 has excellent sailing characteristics combined with comfort, beauty and quality. The interior is typical for Sweden Yachts with excellent finish, roomy living space, a high quality galley and plenty of storage space.
Scooby Doo is well equipped and will offer great value go anywhere cruising.
End grain balsa core sandwich using fibreglass mat and rowing on both sides gives a light, rigid and well insulated hull. Balsa core is used from toe rail to water line. Solid laminate is used in the joint between the hull halves. Bottom reinforcements are longitudinal and transversal solid laminate design.
End grain balsa cores and sandwich with moulded fibreglass on bothsides. Stress areas where winches, sheet tracks, etc. are fixed are reinforced by replacing the balsa core with marine plywood or by using backing plates.
Hull Deck Joining
The hull is laminated to the deck using glass and polyester. The toe rail is then bolted throughdeck and hull flange using a special sealing material.
Ballast keel is lead castingwithantimony. Cast-in keel bolts areofstainlesssteel, Lifting lug is fastened to the keelbolts.
The balanced spade rudder is moulded in fibreglass using uni-directional rowing and mat for maximum strength. The rudder stock is of stainless steel with three bearings;.2 ball bearings and 1 bronze bearing in the heel.
Volvo Penta original glassfibre bed moulded to the hull and filled with heavy ballast for maximum stability.
Galvanized mast step bolted to bottom reinforcement.
Sweden Yachts designed and specially developed steel beam system allowing heavy loads to be taken by bulkheads without the need for additional internal reinforcements.
Teak Deck is laid from 12mm first class teak ribs bonded to the deck with polyurethane and secured by stainless steel screws. Expansion joints sealed by special silicone. Teak also in cockpit.
Aluminum toe rail bolted to deck-hull. 4 mooring bollards,10 stanchion bases and tapered SS stanchions,pulpit,pushpit and ladder in SS double lifelines, navigation lights, aluminum genoa tracks with double roller fairleads. Bilge pump. Anchor roller. Main sheet track with slider and tag lines.
Pedestal steering with 8" radial wheel, brake and stainless steel chain and wires. 36" stainless steel wheel. Compass fitted on pedestal top with SS guard rail.
Bolts, nuts, washers and screws used for fastening deck equipment are of stainless steel. Sealing used between deck and equipment is polyurethane, silicone or specially developed material.
Volvo Penta 2003 28 hp 3 cylinder diesel engine.
Sail drive with 2 bladed folding prop.
Fresh and seawater cooled.
12 volts via 4 batteries 3 domestic and 1 engine start. All new 2016
Shore and engine chargers
Full shore power system.
Hot and cold pumped water system.
Hot water produced from engine and shore power.
Seawater foot pump
2x Water tanks with 250 litres capacity
1x Fuel tank with 125 litres capacity
1x Holding tank with 75 litres capacity.
Selden silver anodized alloy oval section. Double spreaders in aluminum. All halyards are internal. Appropriate blocks and exits for halyards.
Selden silver anodized alloy section. Slab reef system and outhaul internally in boom with stoppers and central winch.
All stays and shrouds in stainless steel wire.
1 main halyard
1 kicking strap
3 reefing lines
All sheets etc.with appropriate blocks and shackles.
Slab reefing main
Roller furling Genoa
Winches and Jammers
2Lewmar.46.2-speed;Genoa sheet winches
2 Lewmar 30 2-speed winches
2 cleats for halyards
1 Andersen bottom drive stainless steel reefing winch on mast
2 10" handles with lock. Lead blocks, cleats,etc.
1 Lewmar 16 S/T for main sheet.
Main by North year 2011 (unused)
Genoa by UK sails
No 2 By North 2011
Spinnaker By UK Sails (unused)
Storm Jib UK Sails (unused)
Marine grade water proof plywood faced with selected mahogany is used in all bulkheads and major joinery.Specially selected solid mahogany in frames and doors. Marine grade lauvan in bottoms, shelves, etc. where not visible.All main bulkheads bonded to hull and deck using glass mat and polyester, All main visible hull sides covered by mahogany planking ribs.Ceiling, top sides and minor visible hull sides padded with foam backed vinyl.Hull sides, bottom, bilge, etc, top coated throughout the interior.Cabin sole teak with inlaid wood stripes. All mahogany is varnished in satin finish. Cabin sole teak is oiled.
Double berth to starboard.Sail stowage under berth. Shelves along hull sides SB and port. Seat to the port.
Moulded bottom section drained moulded shower and washbasin unit. Locker along the hull side
L-shape settee on both sides.Table fixed middle section and folding wings. Stowage, behind and under settee on both sides. Book shelf on port side. Door to forward cabin.
L-shaped galley with 100 Litres 12volt double ice-box,, double sink, drawer section, cutting board, dry food locker, double overhead cupboards. Formica top.2 burner gas stove with oven. The ice-box is drained to a separate sump. Waste basket.
Large navigation table with stowage for charts etc. Electrical master area panel mounted in bulkhead locker. Navigation seat.
Large aft cabin with double berths on SB side, single berth to port. Wardrobe and stowage space. Door to main cabin. Shelves along hull sides SB and port.
4 fixed aluminum framed windows in cabin trunk, 2 open able aluminum framed windows in.
Large hatch to forward cabin, medium size hatch to main cabin and small hatch to toilet. Plexiglass companionway sliding hatch.
1 Dorade ventilator, 1 extraction ventilator. Engine air inlet from cockpit. Battery compartment ventilated. Aft cabin ventilated.
Blue and velvet curtains
Mooring and Anchoring
2 x Anchors Main anchor with 60m chain Kedge anchor with 10m Chain and 30m warp.
4 Fenders new 2016 and 3 warps
Raymarine i70 log speed and depth.
Raymarine E7 7" Chartplotter and GPS
Raymarine E90W Charplotter.
Raymarine SPX/O Autopilot.
Raymarine AIS 500
Clock and Barometer
Sprayhood new 2012
2x Bilge pumps electric new 2017 and manual.
3x Fire Extinguishers
Radio and CD player new 2016.
Scooby Doo spent most of her life in Sweden.
Former owner brought her to the UK in 2012 and she used until 2016.
The teak decks are in very good condition as the boat was formally wintered ashore undercover.
Resent Replacements included.
New Rudder Bearing 2017
New Mast Tabernacle 2017
New Electric Bilge Pump 2017
New Main and Genoa Halyard 2017.
In this case we are acting as brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.
Note to seller and purchaser: If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat. If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled. If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.